Fire Alarm Systems

Every building, regardless of its purpose, should be professionally fitted with a fire detection system.  In an emergency situation, the early detection of a fire can save lives and will minimise damage to your property and belongings.

At Wolf Security, we design fire detection systems for commercial and residential properties in the North West of England.  Our fire detection systems range from conventional systems through to large networked multi-panel intelligent systems. Following a review of your premises, we will supply, install and maintain a fire detection system that will provide you with the most appropriate fire detection system giving you round-the-clock peace of mind.

Conventional Fire Alarms

From domestic homes, small shops and offices to medium sized buildings, Wolf Security’s conventional fire alarm systems are a cost effective way to draw early attention to the start of a fire.

Detectors can be installed at various zone points throughout the building. When a detector is triggered, a fire alarm control panel will indicate which zone has been triggered. This provides you or the London Fire Brigade with an early indication of the hazard area.

Analogue Addressable Systems

These are sometimes called analogue fire alarm systems. These are sophisticated systems that allows the individual device that has caused a fault or fire signal to be displayed on the control panel. These systems use loops onto which the detectors, call points, input/output devices, sounders and other devices are installed. Each loop can then be divided into a number of zones as required by the software, allowing a rapid and targeted response to any potential fire.

Each control panel can have up to 4 loops and up to 16 control panels can be networked together – this would enable over 8000 devices to be fitted to the installation!

The addressable fire detection system option is ideal for large office blocks and similar properties.